FAQ


Question:1.  How to choose the right LED bulb?

1.  Estimate desired wattage and compare brightness levels carefully
Wattage is the measurement of electricity or power. LED light bulbs are vastly more efficient, using much less power. A 9-watt LED is likely to give the same amount of brightness as a 40-watt incandescent bulb.

2.  Level of lighting focus, or lighting angle
It is important to know how a LED bulb will be used and when it will be installed. If the bulbs are fitted in a display cabinet, the beam needs to be very tightly focused and directed on a single display item. For a reading corner, bedside lamp, or desk lamp, a slightly wider cone of light is required. It should be noted that 100% of the light is directed exactly where its required, rather than it being wasted, diluted and scattered.

3.  Choose between warm and cool light
When the light is described ad warm or cool white, it is in reference to its color temperature. The color temperature is a measurement that is used to define the color of light. Where, "Warm White" is 2700/3000K, "Natural White" = 3500K, "Cool White" is 4100K and "Daylight White" is 5000K or more.

4.  Standard base or pin base
LEDs are available in several types of 'pin' sackets or the standard "screw" (Edison) bases for recessed or track lighting.

5.  Aware of fitting for bulbs
It will be necessary to identify whether they are for 100-240 volt connections or 12 volt connections.

Question:2.  What is the composition of Laminate flooring?

It's made up of 4 layers,
Layer 1 is the 'Durable Wear Layer',
Layer 2 is the 'Decor Layer',
Layer 3 is 'Solid HDF Core', and
the final layer is the 'Water Repellant Balancing Layer'.

Question:3.  What are the advantages of Uniclic?

Planks can be installed easily on the long and short sides whilst lying flat on the floor and they do not require being rotated down on an angle. This makes installation around skirting boards, door frames easier. Installation time is faster than installing other glueless locking systems. Additionally, individual boards can be replaced without uplifting the entire floor.